Microsoft MS-102 Microsoft 365 Administrator Exam Exam Practice Test

HOTSPOT

You have a Microsoft 365 subscription that contains the users shown in the following table.

You need to configure a dynamic user group that will include the guest users in any department that contains the word Support.

How should you complete the membership rule? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You have a Microsoft 365 subscription.

You need to receive a notification each time a user in the service desk department grants Full Access permissions for a user mailbox.

What should you configure?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

Your network contains an on-premises Active Directory domain named contoso.com. The domain contains the users shown in the following table.

The domain syncs to an Microsoft Entra tenant named contoso.com as shown in the exhibit. (Click the Exhibit tab.)

User2 fails to authenticate to Microsoft Entra ID when signing in as user2@fabrikam.com.

You need to ensure that User2 can access the resources in Microsoft Entra ID.

Solution: From the on-premises Active Directory domain, you set the UPN suffix for User2 to @contoso.com. You instruct User2 to sign in as user2@contoso.com.

Does this meet the goal?

You have a Microsoft 365 E5 subscription.

You create a Conditional Access policy named Policy1 and assign Policy1 to all users.

You need to configure Policy1 to enforce multi factor authentication (MFA) if the user risk level is high.

Which two settings should you configure in Policy1? To answer, select the appropriate settings in the answer area.

NOTE: Each correct selection is worth one point.

You have a Microsoft 365 E5 subscription that contains three users named User1, User2, and User3.

You use Microsoft Entra ID Protection.

You configure the Users at risk detected alerts setting to send an alert when a user risk level of low or above is detected.

Users are assigned the risk levels shown in the following table:

By the end of the day, how many alerts were generated for User1, and how many alerts were generated for User2 and User3?

Your network contains three Active Directory forests. There are forests trust relationships between the forests.

You create a Microsoft Entra tenant

You plan to sync the on-premises Active Directory to the Microsoft Entra tenant.

You need to recommend a synchronization solution. The solution must ensure that the synchronization can complete and as quickly as possible if a single server fails.

What should you include in the recommendation?

You have a Microsoft 365 subscription.

You have the retention policies shown in the following table.

Both policies are applied to a Microsoft SharePoint site named Site1 that contains a file named File1.docx.

File1.docx was created on January 1, 2022 and last modified on January 31,2022. The file was NOT modified again.

When will File1.docx be deleted automatically?

You have a Microsoft 365 E5 subscription that contains the devices shown in the following table.

At 08:00. you create an incident notification rule that has the following configurations:

• Name: Notification!

• Notification settings

o Notify on alert seventy: Low

o Device group scope: All (3)

o Details: First notification per incident

• Recipients: Userl@contoso.com, User2@contoso.com

At 08:02. you create an incident notification rule that has the following configurations:

• Name: Notification

• Notification settings

o Notify on alert severity: Low. Medium

o Device group scope: DevtceGroup1, DeviceGroup2

• Recipients: Userl@contoso.com

in Microsoft Defender XDR, alerts are logged as shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No1.

NOTE: Each correct selection is worth one point.

You have a Microsoft 365 E5 tenant that contains the devices shown in the following table.

You plan to review device startup performance issues by using Endpoint analytics.

Which devices can you monitor by using Endpoint analytics?

You have a Microsoft 365 E5 subscription and use Microsoft Defender for Endpoint. The subscription contains Windows 11 devices.

You need to create a policy to restrict users from accessing the Device security settings and the Account protection settings in Windows Defender Security Center on the devices.

Which type of policy should you create, and which template should you use? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You have an Azure subscription and an on-premises Active Directory domain. The domain contains 50

computers that run Windows 10.

You need to centrally monitor System log events from the computers.

What should you do? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it As a result, these questions will not appear in the review screen.

Your network contains an on-premises Active Directory domain. The domain contains domain controllers that run Windows Server 2019. The functional level of the forest and the domain is Windows Server 2012 R2.

The domain contains 100 computers that run Windows 10 and a member server named Server1 that runs Windows Server 2012 R2.

You plan to use Server1 to manage the domain and to configure Windows 10 Group Policy settings.

You install the Group Policy Management Console (GPMC) on Server1.

You need to configure the Windows Update for Business Group Policy settings on Server1.

Solution: You raise the domain functional level to Windows Server 2019. You copy the Group Policy Administrative Templates from a Windows 10 computer to the Netlogon share on all the domain controllers.

Does this meet the goal?

You have a Microsoft 365 E5 subscription that contains two groups named Group1 and Group2. You plan to configure a data loss prevention (DLP) strategy that meets the following requirements:

• Members of Group1 must be prevented from sharing documents that contain credit card numbers.

• Members of Group2 must be prevented from sharing documents that are classified as internal by Microsoft Purview Information Protection.

• The solution must minimize administrative effort

You need to create a DLP policy for each group.

Which condition should you add to each DLP policy rule for each group? To answer, select the appropriate options in the answer

area.

NOTE: Each correct selection is worth one point.

You have a Microsoft 365 E5 subscription that contains the groups shown in the following table.

You plan to create 10 new users and configure group-based licensing to assign each user a Microsoft 365 E5 license.

To which group should you add the users, and which portal should you use to assign the license? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a Microsoft 365 E5 subscription.

You create an account for a new security administrator named SecAdmin1.

You need to ensure that SecAdmin1 can manage Microsoft Defender for Office 365 settings and policies for Microsoft Teams, SharePoint, and OneDrive.

Solution: From the Microsoft 365 admin center, you assign SecAdmin1 the Exchange Administrator role.

Does this meet the goal?

You configure a data loss prevention (DLP) policy named DLP1 as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

NOTE: Each correct selection is worth one point.

You have a Microsoft 365 subscription.

You configure a new Microsoft Entra ID enterprise application named App1. App1 requires that a user be assigned the Reports Reader role.

Which type of group should you use to assign the Reports Reader role and to access App1?

You have a Microsoft 365 E5 subscription and use Microsoft Defender for Endpoint.

You integrate Microsoft Defender for Endpoint with Microsoft Intune.

From Microsoft Defender Vulnerability Management, you review the top security recommendations and discover a recommendation to update Microsoft Edge (Chromium) to a later version.

You need to ensure that a security task is added to Intune to address the recommendation.

What should you do?

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a Microsoft 365 E5 subscription.

You create an account for a new security administrator named SecAdmin1.

You need to ensure that SecAdmin1 can manage Microsoft Defender for Office 365 settings and policies for Microsoft Teams, SharePoint, and OneDrive.

Solution: From the Microsoft 365 admin center, you assign SecAdmin1 the Exchange admin role.

Does this meet the goal?

You have a Microsoft 365 E5 tenant.

You need to ensure that when a document containing a credit card number is added to the tenant, the document is encrypted.

Which policy should you use?

HOTSPOT

You have a Microsoft 365 tenant.

You plan to create a retention policy as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

NOTE: Each correct selection is worth one point.

: 224 HOTSPOT

You have a Microsoft 365 E5 subscription that contains two users named Admin1 and Admin2.

All users are assigned a Microsoft 365 Enterprise E5 license and auditing is turned on.

You create the audit retention policy shown in the exhibit. (Click the Exhibit tab.)

After Policy1 is created, the following actions are performed:

Admin1 creates a user named User1.

Admin2 creates a user named User2.

How long will the audit events for the creation of User1 and User2 be retained? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You have a Microsoft 365 subscription that uses Security & Compliance retention policies.

You implement a preservation lock on a retention policy that is assigned to all executive users.

Which two actions can you perform on the retention policy? Each correct answer presents a complete solution.

NOTE: Each correct selection is worth one point?

You have a Microsoft 365 E5 subscription.

You plan to implement Microsoft Purview policies to meet the following requirements:

Identify documents that are stored in Microsoft Teams and SharePoint that contain Personally Identifiable Information (PII).

Report on shared documents that contain PII.

What should you create?

You have a Microsoft 365 E5 subscription and use Microsoft Defender for Cloud Apps.

You need to create a file policy to generate an alert when a file is shared with a domain named fabrikam.com.

How should you complete the filter for the policy? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You have a computer that runs Windows 10.

You need to verify which version of Windows 10 is installed.

Solution: From the Settings app, you select Update & Security to view the update history.

Does this meet the goal?

You have a Microsoft 365 subscription that uses Microsoft Defender for Cloud Apps.

You configure a session control policy to block downloads from SharePoint Online sites.

Users report that they can still download files from SharePoint Online sites.

You need to ensure that file download is blocked while still allowing users to browse SharePoint Online sites.

What should you configure?

Your on-premises network contains an Active Directory domain.

You have a Microsoft 365 subscription.

You need to sync the domain with the subscription. The solution must meet the following requirements:

• On-premises Active Directory password complexity policies must be enforced.

• Users must be able to use Microsoft Entra Self-Service Password Reset (SSPR).

What should you use?

You have a Microsoft 365 subscription that contains the users shown in the following table.

You have the named locations shown in the following table.

You create a conditional access policy that has the following configurations:

• Users or workload identities:

o Include: Group1

o Exclude: Group2

• Cloud apps or actions: Include all cloud apps

• Conditions:

o Include: Any location

o Exclude: Montreal

• Access control: Grant access, Require multi-factor authentication

User1 is on the multi-factor authentication (MFA) blocked users list.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

NOTE: Each correct selection is worth one point.

You are evaluating the use of multi-factor authentication (MFA).

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

NOTE: Each correct selection is worth one point.

You need to ensure that Admin4 can use SSPR.

Which tool should you use. and which action should you perform? To answer, select the appropriate options m the answer area.

NOTE: Each correct selection is worth one point.

You need to configure the Office 365 service status notifications and limit access to the service and feature updates. The solution must meet the technical requirements.

What should you configure in the Microsoft 365 admin center? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You need to ensure that the Microsoft 365 incidents and advisories are reviewed monthly.

Which users can review the incidents and advisories, and which blade should the users use? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You need to configure just in time access to meet the technical requirements.

What should you use?

You need to configure Microsoft Entra Connect Sync to support the planned changes for the Montreal Users and Seattle Users OUs.

What should you do?

HOTSPOT

You create the Microsoft 365 tenant.

You implement Microsoft Entra Connect Sync as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

NOTE: Each correct selection is worth one point.

You need to ensure that all the sales department users can authenticate successfully during Project1 and Project2.

Which authentication strategy should you implement for the pilot projects?

Which role should you assign to User1?

Available Choices (select all choices that are correct)

You are evaluating the required processes for Project1.

You need to recommend which DNS record must be created while adding a domain name for the project.

Which DNS record should you recommend?

You need to configure the information governance settings to meet the technical requirements.

Which type of policy should you configure, and how many policies should you configure? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You need to create the Safe Attachments policy to meet the technical requirements.

Which option should you select?

You need to configure automatic enrollment in Intune. The solution must meet the technical requirements.

What should you configure, and to which group should you assign the configurations? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You create the planned DLP policies.

You need to configure notifications to meet the technical requirements.

What should you do?

You plan to implement the endpoint protection device configuration profiles to support the planned changes.

You need to identify which devices will be supported, and how many profiles you should implement.

What should you identify? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You need to configure Office on the web to meet the technical requirements.

What should you do?

You need to configure the compliance settings to meet the technical requirements.

What should you do in the Microsoft Endpoint Manager admin center?

You need to create the DLP policy to meet the technical requirements.

What should you configure first?

You need to ensure that User2 can review the audit logs. The solutions must meet the technical requirements.

To which role group should you add User2, and what should you use? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You need to meet the technical requirement for log analysis.

What is the minimum number of data sources and log collectors you should create from Microsoft Cloud App Security? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You need to meet the technical requirement for large-volume document retrieval. What should you create?

You need to meet the technical requirement for the EU PII data.

What should you create?

You need to protect the U.S. PII data to meet the technical requirements.

What should you create?

You need to recommend a solution for the security administrator. The solution must meet the technical requirements.

What should you include in the recommendation?

Which report should the New York office auditors view?

You need to meet the requirement for the legal department.

Which three actions should you perform in sequence from the Security & Compliance admin center? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

You need to meet the technical requirement for the SharePoint administrator. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

You need to meet the technical requirements and planned changes for Intune.

What should you do? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

You need to ensure that User1 can enroll the devices to meet the technical requirements. What should you do?