Redeem Your Black Friday Code: 75% Off All Exam Bundles! Use coupon code below! - Ends in 0d 00h 00m 00s - Coupon code: discactive

HP HPE7-A12 HPE Network Data Center Professional Architect Exam Exam Practice Test

Page: 1 / 7
Total 70 questions

HPE Network Data Center Professional Architect Exam Questions and Answers

Question 1

An RFP states that the proposal must be TAA-compliant. What conclusion should you make?

Options:

A.

You must recommend switch models that support MACsec on uplinks.

B.

You must tell implementers to disable ensure protocols such as Telnet and SNMPv1/v2.

C.

You must recommend CX 10000 Series switches.

D.

You must propose TAA accessories such as transceivers.

Question 2

A customer’s legacy three-tier architecture is being modernized with an L3 spine-and-leaf topology. The CX switches in the topology will supply the overlay. The customer data center has six VRFs. The customer has requested service leaf switches to connect to two clustered firewalls that route and filter traffic between the VRFs.

How can the efficiency of traffic flow between subnets in the same VRF be maximized?

Options:

A.

Use the centralized gateway model for these subnets, selecting a different centralized gateway for each VRF

B.

Within each VRF, use the distributed gateway (L3 anycast) model for most subnets but the centralized gateway design for the subnets with the highest security needs

C.

Use the firewall cluster as centralized gateways for these subnets

D.

Use the distributed gateway (L3 anycast) model for these subnets

Question 3

Refer to the exhibit.

Question # 3

You are designing a data center network. The customer requests that you connect the data center core to their firewalls. The customer uses six VRFs for segmentation, and the firewalls are responsible for handling traffic in all of the VRFs.

What is the recommended design for the links between the data center core switches and the firewalls?

Options:

A.

Each link should be a routed-only port (ROP) in a /31 subnet.

B.

Link 1 and Link 3 should be one VSX LAG. Link 2 and Link 4 should be another VSX LAG.

C.

All links should be in the same VSX LAG.

D.

Link 1 and Link 2 should be one VSX LAG. Link 3 and Link 4 should be another VSX LAG.

Question 4

You are designing an L3 spine-and-leaf architecture for a customer using CX 10000 Series switches as leaf switches. The customer has added a requirement that the leaf switches also support the servers’ iSCSI adapters. You have verified that the design also meets the customer’s requirements for lossless iSCSI. The customer asks for guidance on ensuring that the east-west firewall allows the iSCSI traffic.

What should you explain?

Options:

A.

The customer should place the iSCSI adapters in a PVLAN isolated VLAN to ensure traffic is forwarded without disruption from VM traffic.

B.

The customer should place the iSCSI adapters in a PVLAN primary VLAN to ensure traffic is permitted.

C.

CX 10000 switches do not implement east-west firewall policies on traffic in a no-drop PFC queue.

D.

Fabric Composer supports VM tag-based Endpoint Groups (EPGs) which will make it easy for the customer to select the iSCSI traffic and permit it.

Question 5

Which documents should be included in the solution proposal? Choose two.

Options:

A.

Network as-built diagram

B.

Architect ' s notes from meetings

C.

Data sheets of equipment proposed

D.

Bill of Materials

Question 6

You are upgrading a customer’s legacy three-tier architecture to an L3 spine-and-leaf topology. The CX switches in the topology will supply the overlay. The customer data center uses six VRFs. The customer has requested service leaf switches that connect to two clustered firewalls, which route and filter traffic between the VRFs.

How should the service leaf switches be connected to the firewalls?

Options:

A.

On four ROPs (two per switch), each ROP being attached to the six data center VRFs

B.

On two VSX LAGs, which are in the default VRF

C.

On two VSX LAGs, each of which carries one VLAN per VRF

D.

On four ROPs (two per switch), each ROP being in the default VRF

Question 7

Which feature or capability should be implemented to secure the network?

Options:

A.

Bluetooth dongle

B.

VSF on spines/cores layer

C.

Control-Plane Access Control Lists

D.

Disable access to RESTAPI

Question 8

Refer to the scenario. Given the ServiceNow-integration requirement, which CX feature automatically creates ServiceNow tickets from network events?

Options:

A.

NAE

B.

SOAP

C.

probe

D.

REST API

Question 9

A customer wants to host endpoints on the Border Leaf switches. Is this topology supported?

Options:

A.

Yes, configuring VLANs and SVIs on a Border is a supported way to operate.

B.

Yes, using Routed-only ports.

C.

No, as a Border Leaf is a pure Layer 3 device and has to remain like that.

D.

No, as a Border Leaf only supports Loopback addresses.

Question 10

Waratah Hospital, located in Australia, plans to move many data center services to a new facility. (The remaining legacy data center is not included in this project.) Waratah Hospital engaged an external consultant to help with the new data center network design.

Based on the data center network-infrastructure requirements, the external consultant has produced a high-level design. The following summarizes the design document’s contents.

Requirements and information:

Six racks in the data center room (a single row).

Redundant Top of Rack leaf switches with back-to-front cooling in every rack, delivering 10/25 Gbps connectivity to servers, storage, and other devices.

Four 100 GbE uplinks per leaf switch.

The customer requested that all switch ports face the back of the racks (hot aisle).

OOB management for servers, storage, and network must be delivered through an external switch with back-to-front cooling. This switch must be included in the solution. One OOB switch provides connectivity for two racks.

Core equipment for the OOBM network is being reused.

Middle-of-row spine switches.

The data center must connect to the hospital building with links providing 400 Gbps.

Internet access is provided through an existing firewall cluster with two firewalls, with each firewall in one data room. The second firewall operates in standby mode, and VRRP is used on the firewalls for failover. The data center network must connect to these firewalls with links totaling 100 Gbps.

The external link is a dark-fiber direct link based on single-mode fiber (OS2). The distance to the main hospital is 1.5 KM. The links will terminate on two core switches in the hospital.

The customer also requires:

99.999% uptime for this life-critical environment.

Planned and unplanned downtime must be minimized.

Software upgrades are permitted only once per year with close to zero downtime.

All life-critical resources are accessed locally, and all resources are within the hospital campus.

Waratah Hospital requires a highly secure data-center environment. Encrypted wire-speed connectivity between the data room and the hospital is mandatory because the link between the buildings crosses a public road.

Waratah Hospital has a mix of virtualized (vSphere) servers, Nutanix storage, bare-metal servers, backup servers, and other devices.

In the past, the hospital experienced a security breach that caused data loss, network downtime, and identity theft.

Refer to the scenario. You have learned that the customer must extend two VRFs between the new data center network and the firewall. To meet the scenario requirements and general best practices, what should you recommend for connecting border leaf switches to the hospital core?

Options:

A.

One VSX LAG to each firewall consisting of 25 GbE links on the border leaf switches, two SVIs on each LAG.

B.

One 100 GbE link between border leaf switch 1 and the active firewall. One 100 GbE link between border leaf switch 2 and the passive firewall. Two subinterfaces on each link that act as ROPs.

C.

2x 25 GbE routed only ports between border leaf switch 1 and the active firewall. 2x 25 GbE routed only ports between border leaf switch 2 and the passive firewall.

D.

One VSX LAG that includes a full mesh of 25 GbE links between the border leaf switches and firewall cluster, two SVIs on the LAG.

Question 11

A customer currently has a data-center network using CX switches and Pensando for east-west firewalling. The data center is highly virtualized with VMware, but the customer is considering migrating some workloads to HPE VMs running on HPE Morpheus VM Essentials (VME).

What should you explain?

Options:

A.

The customer will not be able to implement microsegmentation between the HPE VMs on the same subnet, but can implement segmentation between VMs on different subnets.

B.

The customer should use the VME DSS plug-in to utilize the full firewall features, including microsegmentation.

C.

The customer will not be able to implement the east-west firewall policies for traffic originating from the HPE VMs, but can continue to use the legacy policies to secure other data center traffic.

D.

The customer should purchase the HPE Morpheus Enterprise license to enable support for PVLAN and the full firewall features, including microsegmentation.

Question 12

Waratah Hospital, located in Australia, plans to relocate many data-center services to a new facility. The remaining legacy data center is outside this project’s scope. Waratah Hospital engaged an external consultant to help design the new data center network.

Based on the data center network-infrastructure requirements, the external consultant created a high-level design. The design document is summarized below.

Requirements and information:

Six racks in the data center room, arranged in a single row.

Redundant top-of-rack leaf switches with back-to-front cooling in every rack, delivering 10/25 Gbps connectivity for servers, storage, and other devices.

Four 100 GbE uplinks per leaf switch.

The customer requested that all switch ports face the rear of the racks (the hot aisle).

OOB management for servers, storage, and network devices must be provided through an external switch with back-to-front cooling. This switch must be included in the solution. One OOB switch provides connectivity for two racks.

Core equipment for the OOBM network is being reused.

Middle-of-row spine switches.

The data center must connect to the hospital building using links that provide 400 Gbps.

Internet access is supplied through an existing firewall cluster with two firewalls, with one firewall in each data room. The second firewall operates in standby mode, and VRRP is used on the firewalls for failover. The data center network must connect to these firewalls with links totaling 100 Gbps.

The external link is a direct dark-fiber link based on single-mode fiber (OS2). The distance to the main hospital is 1.5 KM. The links will terminate on two core switches in the hospital.

The customer also requires:

99.999% uptime for this life-critical environment.

Planned and unplanned downtime must be minimized.

Software upgrades are permitted only once per year, with close to zero downtime.

All life-critical resources are accessed locally, and all resources are located within the hospital campus.

Waratah Hospital requires a highly secure data center environment. Encrypted wire-speed connectivity between the data room and the hospital is mandatory because the link between the buildings crosses a public road.

Waratah Hospital has a mixture of virtualized (vSphere) servers, Nutanix storage, bare-metal servers, backup servers, and other devices.

The hospital previously experienced a security breach that caused data loss, network downtime, and identity theft.

Which valid assumptions can be made for this scenario when preparing the network design documentation? Choose two.

Options:

A.

Sufficient virtualization resources for the deployment of software will be available.

B.

The customer ' s staff can implement the project.

C.

The customer ' s budget for the project will be met.

D.

Sufficient cabling between data centers will be available.

E.

Hardware delivery will meet project timelines.

Question 13

Refer to the exhibit.

Question # 13

You can change the services to save the customer money without affecting the level of support delivered. What change should you make?

Options:

A.

Selecting hardware support only FC 4h OS HW

B.

Selecting SW + TechSupp

C.

Selecting HW Onsite + SW + TechSupp FC 4h OS CDMR

Question 14

You have delivered a CX 10000-based data-center network to a customer. The customer wants to ensure a smooth transition to the new network before beginning to implement the security capabilities.

What should you recommend for the initial deployment?

Options:

A.

Making sure that strict firewall bypass is enabled for ARP broadcasts

B.

Making sure that strict firewall mode is disabled

C.

Making sure that all VRFs have been added to PSM with an ingress policy that has no rules

D.

Making sure that all networks have been added to PSM with an egress policy that has no rules

Question 15

Which information is likely to appear in the device-inventory deliverables? Choose two.

Options:

A.

RMA instructions

B.

migration Gantt charts

C.

device IP address

D.

device name

Question 16

Click the location where you would implement the CX 10000 network-segmentation policy in this data-center deployment.

Question # 16

Options:

Question 17

You have designed a spine-and-leaf topology containing 16 leaf switches and four spine switches. The customer does not have an existing overlay solution. You are helping the implementer work with the customer to obtain IP address blocks for the design. You plan to request these /24 subnets:

    One for an individual loopback interface on each switch.

    One for point-to-point connections between leaf and spine switches.

What is one correction you must make?

Options:

A.

Change the /24 subnet request for the point-to-point links to a /23 subnet

B.

Change the /24 subnet request for the individual loopback addresses to a /25 subnet

C.

Ask for another subnet for point-to-point links in the overlay VRF

D.

Ask for another subnet for loopback IP addresses shared by the two members of each VSX pair

Question 18

A customer is upgrading its data-center structured cabling to SMF. At the same time, the customer wants to upgrade the spine switches in its spine-and-leaf topology. A key objective of this upgrade is to eventually support 400GbE leaf-to-spine links. However, for some time, many leaf switches will continue to support 100GbE uplinks.

What is a valid recommendation for the spine switches?

Options:

A.

CX 9300-32D switches using 400G QSFP-DD MPO-16 transceivers

B.

CX 9300-32D switches using 4x100G DR QSFP-DD transceivers

C.

CX 10040 switches using 400G QSFP-DD MPO-16 transceivers

D.

CX 10040 switches using 4x100G DR QSFP-DD transceivers

Question 19

You are recommending HPE Aruba Networking Central to a customer. Which customer requirement can be met only with an AAS license rather than an AAE license?

Options:

A.

The customer requires a license that supports AI Insights for CX 8325 and CX 9300 switches.

B.

The customer has budget available to pay for a full 3-year license as part of the initial payment for the networking solution.

C.

The customer is purchasing some licenses now and more licenses in a few months and would like the option to have the term end for all the licenses.

D.

The customer is just getting acquainted with HPE Aruba Networking Central and wants to start with a 1-year license.

Question 20

A long-time customer has just acquired a company and plans to bring the new data-center sites up to its standards. The customer has requested a bill of materials based only on the locations and port counts at the data-center sites.

Which valid assumptions should be documented in the proposal? Choose two.

Options:

A.

The acquired company ' s full-time staff will be converted to contractors.

B.

The acquired company’s IP schema in the existing data centers will be converted to IPv6.

C.

The project will be funded by the capital budget of the acquired company.

D.

The acquired company’s data center cooling plant allows for the back-to-front airflow preferred by your customer.

E.

The acquired company ' s data center racks are sufficient for the new equipment and will be reused.

Question 21

Waratah Hospital, located in Australia, plans to relocate many data-center services to a new facility. (The remaining legacy data center is not included in this project.) Waratah Hospital has engaged an external consultant to help design the new data-center network.

Based on the data-center network-infrastructure requirements, the external consultant has produced a high-level design. The design document is summarized below.

Requirements and information:

Six racks in the data-center room (a single row).

Redundant top-of-rack leaf switches with back-to-front cooling in every rack, delivering 10/25-Gbps connectivity to servers, storage, and other devices.

Four 100-GbE uplinks per leaf switch.

The customer requested that all switch ports face the rear of the rack racks (hot aisle).

OOB management for servers, storage, and network devices must be provided through an external switch with back-to-front cooling. This switch must be included in the solution. One OOB switch provides connectivity for two racks.

Core equipment for the OOBM network is being reused.

Middle-of-row spine switches.

The data center must connect to the hospital building through links providing 400 Gbps.

Internet access is supplied through an existing firewall cluster containing two firewalls, with one firewall in each data room. The second firewall operates in standby mode, and VRRP is used for firewall failover. The data-center network must connect to these firewalls through links totaling 100 Gbps.

The external link is a dark-fiber direct link using single-mode fiber (OS2). The distance to the main hospital is 1.5 KM. The links will terminate on two core switches in the hospital.

The customer additionally requires:

99.999% uptime for this life-critical environment.

Planned and unplanned downtime must be minimized.

Software upgrades are permitted only once per year, with close to zero downtime.

All life-critical resources are accessed locally, and all resources reside within the hospital campus.

Waratah Hospital requires a highly secure data-center environment. Encrypted wire-speed connectivity between the data room and hospital is mandatory because the inter-building link crosses a public road.

Waratah Hospital has a mixture of virtualized (vSphere) servers, Nutanix storage, bare-metal servers, backup servers, and other devices.

Previously, the hospital experienced a security breach that caused data loss, network downtime, and identity theft.

Refer to the scenario. You have learned that the customer must extend two VRFs between the new data-center facility and the hospital. To meet the scenario requirements and general best practices, what should you recommend to connect border leaf switches to the hospital core?

Options:

A.

8x 50Gbps links that are all routed only ports (ROPs). These ports establish two full meshes between two border leaf switches and two hospital core switches.

B.

4x 100 Gbps links that are routed only ports. Border leaf switch 1 has two ports that connect to hospital core switch 1. Border leaf switch 2 has two ports that connect to hospital core switch 2.

C.

4x 100 Gbps links, establishing a full mesh between two border leaf switches and two hospital core switches. Each link should have two subinterfaces acting as routed only ports.

D.

8x 50Gbps links that establish two full meshes between two border leaf switches and two hospital core switches. The 4 links that connect to the hospital core 1 in one VSX LAG, and the other 4 links are in another VSX LAG.

Page: 1 / 7
Total 70 questions