Cohesity COH-285 Cohesity Certified Protection Professional – NetBackup Appliances Exam Practice Test
Cohesity Certified Protection Professional – NetBackup Appliances Questions and Answers
Backups are failing with status code 96 because tapes have NOT returned to the scratch volume pool after all the images on the tapes have expired.
What may be preventing the media from returning to the scratch pool?
Where can an administrator configure cloud storage throttling?
An administrator has configured a Storage Lifecycle Policy (SLP) to protect a large number of clients which directs backups to Advanced Disk, then duplicates the images to tape. The administrator is experiencing an SLP backlog, which is causing backups to fail. The current values of key configuration settings are listed below:
Host Properties - Maximum data streams per client = 1
Policy Settings - Maximum jobs per policy = 20
Disk Pool Settings - Maximum I/O streams = 20
Storage Unit Settings - Maximum concurrent jobs = 20
Storage Unit Settings - Multiplexing level = 20
Which parameter should the administrator change to reduce the SLP backlog and allow the backups to complete successfully?
What is the default value of Federal Information Processing Standards (FIPS) mode in NetBackup?
A NetBackup appliance is not backing up data as expected. What steps can be taken to troubleshoot the problem?
How can you import a backup image?
A NetBackup appliance is reporting a high network usage. What steps can be taken to troubleshoot the problem?
What is the name of the command that lets you configure the logging levels for different NetBackup processes?
What are the two types of log files that record all activities related to NetBackup appliance security?
What is the role of NetBackup storage units in a backup environment?
What is the maximum age of the host's Certificate Revocation List (CRL) before communication with the host is prevented?
Which command should an administrator use to enable Intelligent Catalog Archiving (ICA)?
What is the name of the feature that allows NetBackup to use a single storage server for multiple media servers or clients?
Which command can an administrator run to test and analyze connections between master servers, media servers, and clients for multiple NetBackup ports?
Which feature is compatible with the NBU-Catalog policy type?
What is the name of the feature that allows NetBackup to migrate data from Cloud Catalyst to MSDP direct cloud tiering?
Backup jobs end with the following series of messages in the Job Details:
Error bpbrm (pid=41876) db_FLISTsend failed: Unable to connect to the database (2505)
12/05/2013 15:39:45 - job 63389 was restarted as job 63390
Failed to get status code information (2505)
Which process is failing to respond?
Where in the NetBackup Administration Console should an administrator look to determine whether an AdvancedDisk storage server is configured?
An administrator observes intermittent connectivity issues between the appliance and clients.
Which NetBackup Appliance Shell Menu (CLISH) command can the administrator use to assist in diagnosing the problem?
What is the name of the feature that lets you configure data buffer parameters for NetBackup appliances using Appliance Web Console (AWC)?
What is the name of the feature that lets you detect and alert on abnormal backup activity in NetBackup?
After creating a NBU-Catalog type backup policy, an administrator receives the following message:
DR file is on the same partition as your catalog and will be unusable in an actual disaster or disk failure.
Which two options are available to the administrator to ensure the DR file is available for future use? (Choose two.)
A NetBackup backup job is taking longer than expected. What steps can be taken to troubleshoot the problem?
What is the name of the NetBackup feature that lets you classify data based on its importance and manage it differently throughout each stage of its life?
What are the different types of images that can be managed by NetBackup?
Which utility is least helpful when troubleshooting network connectivity issues that exist between a media server and a client?
Which action is performed by the NetBackup deduplication plug-in?
A NetBackup restore job has failed with the status code 702. What does this status code mean?
What is required to implement Auto Image Replication?
What are the two commands that let you manage Fibre Channel devices using Appliance Shell Menu (CLISH)?
How can you prioritize, cancel, suspend, resume, restart, retry, or manually run backup and duplication jobs?
Backups are failing with status code 96 because tapes have NOT returned to the scratch volume pool after all the images on
the tapes have expired.
What may be preventing the media from returning to the scratch pool?
Which of the following is true about the NetBackup documentation landing page?
What is the difference between a disk pool and a storage unit in NetBackup?
Which authentication method should an administrator run as a command in the NetBackup Appliance Shell Menu (CLISH), under Settings > Security > Authentication, to configure and manage Network Information Service (NIS) user registration?
What is the name of the feature that lets you define different levels of access and permissions for NetBackup users and groups?
What are the benefits of using Anomaly Detection?
A NetBackup environment with a single tape storage unit is experiencing performance issues when running full backups of a Windows file server with over a million small files. Backups for all other clients on the same network are performing
adequately. What should the administrator modify to improve performance for the client?
What is the difference between synthetic backups and True Image Restore (TIR) in NetBackup?
Which two tasks should an administrator perform prior to upgrading NetBackup Appliances to version 3.1.2? (Choose two.)
What is the name of the command-line interface that lets you configure and manage NetBackup appliances?
Which of the following is NOT a role that can be assigned in NetBackup RBAC?
A NetBackup appliance is reporting a high disk usage. What steps can be taken to troubleshoot the problem?
Which guide should be consulted to learn about the configuration and administration of NetBackup deduplication options?
What is the purpose of NetBackup Accelerator?
A NetBackup appliance is reporting an error with the message "Media error: 0x00000002". What does this error mean?
An administrator wants deduplication clients in a remote office to perform backups so less data is sent over the wide area network (WAN).
Which action should the administrator perform to reduce the total amount of data sent over the WAN?
What is the primary purpose of implementing load balancing media servers with NetBackup appliances?
A Windows policy protects over 100 servers using the directive ALL_LOCAL_DRIVES. The backup window for this policy is a two-hour window that is unused by any other policy. When the jobs run, each server has no more than ten paths, and the overall performance of the disk storage unit is degraded.
Which setting should the administrator modify to ensure only ten jobs write concurrently to the disk storage unit during the backup window?
What is the definition of a Storage Unit?
Which resource should be used for analyzing and optimizing NetBackup Appliances?
How should an administrator enable client-side deduplication for specific clients of a policy?
Which of the following steps are involved in configuring cloud storage in NetBackup?
A NetBackup master server has commenced writing four long-running duplication jobs to an AdvancedDisk disk pool. The value of “Maximum concurrent jobs” for the storage unit and “Limit I/O streams” for the disk pool are both set to 4.
There are 35 jobs queued on the master server that require this disk pool:
5 replication jobs with priority 9999
10 backup jobs with priority 999
20 duplication jobs with priority 99
Two restore jobs that require this disk pool are then submitted with default priority.
Which job type goes active next?
What are the two ways to interact with NetBackup on appliances?
A tape library had the robot firmware upgraded, and now the robot is reading the barcodes with additional characters.
How should an administrator enable NetBackup to use the same characters that were used before the firmware upgrade?
What are the two types of log files that record all activities related to NetBackup appliance security?
Which of the following can be configured using the Appliance Shell Menu (CLISH) and Appliance Web Console?
Which steps should an administrator perform to run an upgrade pre-check for multiple Windows and Linux clients using VxUpdate, without performing the upgrade?
Which feature is enabled after adding a master server to the Trusted Master Servers tab?
What are the two types of deduplication that NetBackup supports for backup data?
What is the maximum number of storage shelves that can be attached to a NetBackup 5340 appliance?
An administrator is experiencing a backup failure, which may be due to lack of connection between the media and master server. The status of the media server is shown below:
Media server showing offline
Which command can the administrator run to change the status of the media server?
Backups to a storage device fail with the following error message:
Disk storage server is down (2106)
The storage server is an OpenStorage (OST) host, and the master server and media server are both acting as media servers under Credentials > Storage Servers in the NetBackup Administration Console. The disk pool is in an Up state and the storage server is in a Down state. Troubleshooting confirmed the OST plug-ins on the servers are mismatched.
Which command should an administrator use to check the plug-in version installed on the servers?
Which guide should be referred to for configuring backup policies in NetBackup 10.1?
What is the name of the feature that lets you use a smart card or a digital certificate for single sign-on (SSO) in NetBackup?
A backup job is showing the following error message:
Which two actions can an administrator perform to ensure the backup completes successfully? (Choose two.)
An administrator took media server mediaA offline for maintenance and set up a new media server mediaB with access to the previously backed up data. When restores are performed for data that was backed up by mediaA, the restores fail.
Which setting must the administrator modify to allow successful restores?
An administrator needs to enable the media server to detect backup anomalies. To do this, the administrator needs to copy the NB_Anomaly.db file from the anomaly_detection folder on the primary server to the anomaly_detection folder on the media server. On which path can the administrator locate the anomaly_detection folder in the primary server?
A NetBackup appliance is not able to delete a backup file. What steps can be taken to troubleshoot the problem?
What are the two commands that let you monitor NetBackup appliances using Appliance Shell Menu (CLISH)?
An administrator has a backup policy with the following policy attributes:
• 3 paths listed in the Backup Selections list
• 5 clients listed in the Clients list
• "Allow multiple data streams" is selected
• "Limit jobs per policy" is set to 4
How many jobs go Active when the job is started, excluding parent jobs, assuming there are enough storage resources to
handle the expected jobs?
An administrator is attempting to protect 500TB of Windows file system data in a 4-hour backup window, when the file servers are idle. The daily change rate for the data is below 1%, and an Initial full backup has been performed to a high performance disk array configured as an Advanced Disk storage unit.
What can the administrator do to ensure subsequent backups complete within the backup window?
Prior to initiating a restore, an administrator realizes that media needed for the restore was written by a server that is unavailable. The administrator does have another server that can perform the restore and that is connected to the same library.
Which two commands can the administrator perform to change the server ownership, so the restore can be performed? (Choose two.)
Which step should an administrator perform to be able to view intrusion detection security events for multiple NetBackup Appliances from a central location?