Summer Sale- Special Discount Limited Time 65% Offer - Ends in 0d 00h 00m 00s - Coupon code: netdisc

Activedumpsnet Logo
  1. Home
  2. HP
  3. HPE Master ASE Advanced Server Solutions Architect V3
  4. HPE0-S22 - Architecting Advanced HPE Server Solutions

HP HPE0-S22 Architecting Advanced HPE Server Solutions Exam Practice Test

Note! Following HPE0-S22 Exam is Retired now. Please select the alternative replacement for your Exam Certification.
Page: 1 / 10
Total 96 questions
Get HPE0-S22 Full Access Download HPE0-S22 PDF

Architecting Advanced HPE Server Solutions Questions and Answers

Question 1

HPE Moonshot 180G Switch Modules and HPE Moonshot 16-SFP+ Uplink ModulesA customer is planning to

replace its DAS-based third-party server solution with an HPE BladeSystem solution using FlexFabric

connected to an iSCSI based HPE StoreVirtual 3200.

Which method should the architect recommend for migrating data from the old system to the new system?

Options:

A.

Use Peer Motion with a temporary 180-day license

B.

Use Business Copy software licensed to the current total size of all DAS storage

C.

Use Virtual Copy software

D.

Use a LAN-based file transfer method

Question 2

A customer’s Gen9 web server resides behind a firewall.

What is the most secure and efficient method to monitor this server?

Options:

A.

Use Intelligent Provisioning.

B.

Use Agentless Management.

C.

Create Firewall rules and install System Management Homepage in Protected Mode.

D.

Create Firewall rules and install WBEM.

Question 3

What defines lease rate factor (LRF)?

Options:

A.

the sum of all costs incurred

B.

the periodic rental payment, expressed as a percentage of equipment cost

C.

the cost of the direct capital expenditure, divided by the expected lifespan of the equipment

D.

the expected time to recover the initial investment

Question 4

A customer needs to integrate an existing incident management application with HPE OneView. The customer

needs to be notified when the physical resource status changes or when a new server is added to the

infrastructure.

Which HPE OneView feature should the architect recommend to the customer?

Options:

A.

HPE Cloud Optimizer for HPE OneView

B.

additional licensed integration plugins for HPE OneView that will allow required integration

C.

WBEM Subscription option that will allow data retrieval from HPE OneView

D.

RESTful API and State Change Message Bus concept

Question 5

An architect is planning an HPE Moonshot System solution to support a data analytics application. The application uses data mining.

Which type of rack configuration should the architect recommend?

Options:

A.

a configuration that balances the ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data

B.

a configuration that has a higher ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data

C.

a configuration that has a lower ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data

D.

a configuration in which the HPE Moonshot System hosts the analytics application and the data

Question 6

An architect is choosing between 1GbE and 10GbE connectivity for an object storage solution.

What is a valid reason to select 10GbE?

Options:

A.

The customer’s network infrastructure is based on QoS service.

B.

The customer needs the system to recover quickly from a failure.

C.

The customer needs the object storage servers to be able to locate random data on a disk more quickly.

D.

The customer plans to increase the memory in the nodes in the future.

Question 7

A customer needs high performance computing (HPC) and a small-scale solution with up to eight processors. The solution should also provide storage in a modular form factor. The customer’s HPC application is designed so that some nodes act as compute nodes while others act as storage nodes that serve data to the compute nodes.

Which HPE Apollo system is most appropriate for this situation?

Options:

A.

HPE Apollo r2200

B.

HPE Apollo r2800

C.

HPE Apollo 6000

D.

HPE Apollo 8000

Question 8

A customer is deploying HPE Apollo Systems, which the customer hopes will help the organization achieve its goals for efficient energy operations. In assessing the customer maturity, the architect finds that IT staff has limited insight into how efficiently servers are operating and limited ability to enforce energy efficiency policies.

Which solution should the architect recommend to help solve these issues?

Options:

A.

HPE Advanced Power Manager

B.

HPE OneView 2.x

C.

HPE Power Advisor

D.

HPE Insight Remote Support

Question 9

An architect is planning an HPE Moonshot System deployment. The architect plans to individually connect each iLO CM module to the management network. The customer informs the architect that this plan requires too many 1GbE ports per rack for the data center infrastructure.

What is one way that the architect can alter the plan to meet the customer’s needs, while still allowing iLO access to the HPE Moonshot Systems?

Options:

A.

Configure iLO traffic to share the same adapters as production traffic. Configure VLANs on the HPE Moonshot switch modules to separate the two types of traffic.

B.

Keep one iLO CM Management port connected to the network. Use the iLO CM link ports on each iLO CM module to daisy chain the chassis together.

C.

Enable the iLO REST API on each cartridge node. The nodes will then accept iLO commands on the adapters that they use for production traffic.

D.

Add a second switch module and uplink module to each chassis to connect to the cartridge iLO ports. Stack the modules in different chassis and connect just one to the management network.

Question 10

A customer plans to migrate from two fully depreciated high end Relational Database Management System (RDMS) servers, which are out of warranty and still under a support contract. An architect has recommended the customer migrate to four new HPE Superdome X BL920 (2P/18C) blades running Microsoft SQL server.

Which cost statement provides a rationale for the migration?

Options:

A.

Based on the TCO/ROI analysis for this project, the Apollo 4510 System makes a better choice as a SQL

Database server platform for this migration

B.

The amount of savings from not renewing the service contract on the existing equipment can pay for the new hardware in just a little over three years

C.

The NPV of -$100,000 USD more than justifies the purchase price of the new equipment

D.

The IRR for this proposal would have to be extended out for ten years to make sense, as the IRR value for the first three years is nearly 20 percent

Question 11

A customer has a mixed environment based on the G6, G7, Gen8, and Gen9 ProLiant server blades. The customer is interested in implementing HPE OneView but needs to understand security and monitoring mechanisms for different server generations.

Which statement most accurately describes different platform support in HPE OneView?

Options:

A.

WBEM Providers will be used for any server managed by HPE OneView.

B.

All servers managed by HPE OneView will use WBEM Providers, but collected data must be translated to the SNMP traps using embedded WMI Mapper.

C.

HPE OneView can manage G7, Gen8/Gen9 servers, while G6 servers can only be monitored.

D.

The customer can select from different management protocols between SNMP v2 and SNMP v3 to match the security requirements.

Question 12

An architect has selected the FlexibleLOM option for HPE XL230a compute trays, which will host an HPC application.

When should the architect select a FlexibleLOM adapter that supports Fibre Channel over Ethernet (FCoE)?

Options:

A.

when the application uses parallel computing and relies on Fibre Channel to reduce latency for communications between compute nodes

B.

when the application requires high throughput between processors and disk drives local to the same compute tray

C.

when the application uses a Fibre Channel storage area network (SAN) for its shared storage solution

D.

when the application requires additional bandwidth and needs a solution for load sharing traffic over multiple links

Question 13

A customer needs a live transcoding solution that meets the following requirements:

  • Supports thousands of HD streams
  • Provides GPU acceleration
  • Provides a high density of streams per Watt and rack unit

Which solution should the architect recommend?

Options:

A.

Several HPE Apollo 6000 Systems with HPE ProLiant XL220a server nodes

B.

Several HPE Moonshot Systems with m700 cartridges

C.

Several HPE Moonshot Systems with m710p cartridges

D.

Several HPE Apollo 6000 Systems with HPE ProLiant XL230a server nodes

Question 14

A customer has HPE BladeSystem BL460c Gen9 blades with two processors and 512GB of memory. The blades are running a MS-SQL database on a clustered 2TB SAS virtual volume that is exported from an HPE 3PAR StoreServ 8200. The customer reports that the MS-SQL database is performing poorly.

After extensive performance trending analysis, it is determined that the database front-end I/O requirements are unpredictable and often exceed 100,000 IOPs with latency in excess 30ms at critical times.

Which solution should the architect recommend to resolve the performance issue with consideration to cost and complexity?

Options:

A.

Increase the memory on the blades to 2TB.

B.

Install SSD drives local to the BL460c.

C.

Install an HPE IO Accelerator on the blade.

D.

Add Adaptive Optimization licensing.

Load More HPE0-S22 Questions 
Page: 1 / 10
Total 96 questions
Get HPE0-S22 Full Access Download HPE0-S22 PDF